Free Quote
Leave Your Message
Differences Between BLDC and PMSM motor
News

Differences Between BLDC and PMSM motor

2026-05-28

Have You Really Mastered the Differences Between BLDC and PMSM?

Since the release of our foundational FOC tutorial, one question keeps popping up: "Is the matching motor a PMSM?" This time, let's start right from the definitions to clear up the differences between these two once and for all. In fact, the answer is hidden in plain sight: if we judge purely by definition, there is no difference between them—both belong to the category of three-phase brushless motors.

BLDC stands for Brushless DC motor. PMSM, on the other hand, stands for Permanent Magnet Synchronous Motor.

  • In terms of control methods: "DC" (Direct Current) indicates that the driving method is DC. That is, in square-wave control, a direct current signal passes between two phases of the three-phase brushless motor, or the internal current of a single phase is DC. "AC" (Alternating Current) can simply be understood as the sine wave under discussion. For a three-phase brushless motor, the current in the phase lines changes periodically.

  • In terms of physical attributes: "Brushless" means exactly that—there are no brushes. Traditional brushed motors feature internal carbon brushes or graphite blocks that constantly rub against the rotor, causing sparks, high noise, heavy heat generation, and short lifespans, alongside lower efficiency and the recurring need to replace worn-out brushes. Brushless motors eliminate this physical contact point, replacing mechanical commutation with an electronic commutator.

  • "Synchronous" means that the rotor speed is perfectly synchronized with the speed of the stator's magnetic field, leaving zero speed difference. Whether the control method is AC or DC, the rotor speed strictly tracks the stator's magnetic field.

  • "Permanent Magnet" refers to a permanent magnet—meaning it inherently possesses magnetism without needing any external influence, just like the common magnets we see every day. The difference between this and an induction motor is that an induction motor derives its magnetic field from electricity, whereas a permanent magnet synchronous motor comes with its own magnetic field via permanent magnets.

  • "Three-phase" simply means there are three sets of coils.

So, what actually is the difference between a BLDC motor and a PMSM?

Looking at the physical structure of the motor itself, whether it utilizes what is commonly called a concentrated winding (often associated with BLDCs) or a distributed winding (often associated with PMSMs), and whether it uses radial or parallel magnetization, both BLDC and PMSM are three-phase brushless synchronous motors . Since both BLDC and PMSM are permanent magnet synchronous motors, when a so-called BLDC or PMSM uses square-wave control, it acts as a brushless DC system; when it uses sine-wave FOC or SPWM control, it acts as a brushless AC system. To the motor itself, there is no difference.

Of course, some might argue that a BLDC has a trapezoidal back EMF (Electromotive Force) while a PMSM has a sinusoidal back EMF. However, in reality, due to the filtering effect inherent to three-phase motors, you cannot measure a flawless trapezoidal wave. The measured back EMF waveforms are all essentially sinusoidal; the only difference is that some motors have fewer ramp components while others have more.

I took two motors—one being a standard model aircraft motor, which is the most common example of what people call a BLDC motor—and measured their back EMF waveforms. Looking at the waveforms, it is actually quite difficult to spot a difference, as both broadly show a sinusoidal shape. In fact, you will find that the back EMF of the vast majority of three-phase motors is sinusoidal, making it tough to distinguish between them. Even if you look at a highly specific motor designed with a trapezoidal back EMF, you still won't see a perfectly trapezoidal wave. Instead, you will only see noticeable back EMF distortion caused by ramp factors, though the sinusoidal characteristics remain intact.

Why do we have the two terms, BLDCM and PMSM?

Given that these two motors are fundamentally identical by definition, why do these separate terms exist? I suspect that in the early days of three-phase brushless motor control, hardware limitations like chip processing power meant controllers could only use square waves—the brushless DC control method. Consequently, people got used to calling them BLDC motors. As chip processing power advanced, sine-wave AC control methods became widespread. To broadly distinguish between DC and AC control methodologies, the terms BLDC and PMSM likely shifted to describe the difference in control methods, rather than differences in the motors themselves.

A lot of materials online state otherwise, which leads beginners in motor control to automatically assume that the motors themselves are fundamentally different. Online resources and popular opinions are not always accurate. It is crucial to evaluate what you hear based on foundational definitions and underlying principles, because the exact same statement can be right in one context and entirely wrong in another.