Free Quote
Leave Your Message
Gear Pump Pressure Explained: Differential Pressure vs System Pressure
Brushless DC Gear Pumps

Gear Pump Pressure Explained: Differential Pressure vs System Pressure

2026-08-20

When selecting a micro gear pump, pressure is just as important as flow rate.

However, two pressure terms are often confused:

Differential Pressure and System Pressure.

Understanding the difference is essential for selecting the correct micro gear pump, estimating motor torque and avoiding pump overload.


Quick Answer: What Is Gear Pump Differential Pressure?

Differential pressure is the pressure increase generated by the pump:

ΔP = Outlet Pressure − Inlet Pressure

For example:

  • Inlet pressure = 1 bar

  • Outlet pressure = 11 bar

Therefore:

Differential pressure = 10 bar

This 10 bar differential pressure is the pressure the pump is actually generating.

By comparison, system pressure describes the pressure existing or allowed within the overall fluid system.

These two specifications should not be treated as the same.


1. Differential Pressure vs System Pressure

The simplest way to understand the difference is:

Term Meaning
Inlet Pressure Pressure entering the pump
Outlet Pressure Pressure leaving the pump
Differential Pressure Pressure increase generated by the pump
System Pressure Pressure existing within the complete system
Maximum Pressure Maximum specified operating or withstand condition

For example:

A system may operate at:

10 bar inlet pressure

and require:

5 bar additional pressure

The pump therefore needs to generate approximately:

5 bar differential pressure

while the pump outlet pressure becomes approximately:

15 bar

This distinction is especially important in closed-loop cooling and high-pressure applications.


2. Why Differential Pressure Matters

When differential pressure increases, the pump has to work harder.

Higher pressure generally means:

  • Higher pump torque

  • Higher motor current

  • Greater mechanical loading

  • More internal leakage

  • Lower volumetric efficiency

  • Potentially higher temperature

Therefore, a pump's flow rating should always be evaluated together with pressure.

Instead of asking:

"What is the maximum flow?"

Ask:

"What flow can the pump provide at my required differential pressure?"

For flow calculations, see:

https://www.boyangmotor.com/news/how-to-calculate-micro-gear-pump-flow-rate/


3. How Pressure Affects Gear Pump Flow

Micro gear pumps are positive-displacement pumps, so their theoretical flow is primarily determined by:

Displacement × RPM

However, actual flow is also affected by pressure.

As differential pressure increases, internal leakage can increase.

This means:

Higher Differential Pressure → Lower Volumetric Efficiency → Lower Actual Flow

For example, a pump may theoretically produce:

2.0 L/min

at a certain RPM.

At low pressure, the actual flow might be close to the theoretical value.

At higher pressure, internal leakage may increase and actual flow may decrease.

This is why pump performance curves are more useful than maximum-flow specifications alone.

For pump selection:

https://www.boyangmotor.com/news/how-to-select-micro-magnetic-gear-pump/


4. Pressure and Pump Torque

One of the most important relationships for a motor-driven gear pump is:

Higher Pressure → Higher Torque Requirement

A simplified relationship for hydraulic power is:

P = Q × ΔP

Where:

  • P = hydraulic power

  • Q = flow rate

  • ΔP = differential pressure

The motor must provide enough mechanical power to overcome the hydraulic load and pump losses.

For a given pump displacement, increasing differential pressure generally increases the required torque.

This is why selecting the pump and BLDC motor separately can result in an undersized motor.

The correct approach is:

Flow → Pressure → Pump RPM → Torque → Motor


5. Pressure, RPM and Motor Selection

Suppose a micro gear pump needs:

  • Flow: 2 L/min

  • Differential pressure: 10 bar

  • Speed: 2,000 RPM

The pump must generate the required pressure at 2,000 RPM while the motor provides sufficient torque.

If the pressure requirement increases from:

10 bar → 20 bar

the motor load will generally increase significantly.

The motor therefore needs sufficient:

  • Continuous torque

  • Peak torque

  • Current capacity

  • Thermal performance

For this reason, pressure should be defined before finalizing the BLDC motor.

See the related motor-pump matching guide:

https://www.boyangmotor.com/news/how-to-match-a-bldc-motor-with-a-micro-gear-pump/


6. What Is System Pressure?

System pressure refers to the pressure within the overall fluid circuit.

It may be affected by:

  • Pump outlet pressure

  • Reservoir pressure

  • Static head

  • Pipe resistance

  • Valves

  • Filters

  • Heat exchangers

  • Nozzles

  • Pressure regulators

  • Downstream equipment

For example, a cooling loop may have a high operating pressure because the system is closed and pressurized.

The pump does not necessarily generate all of that pressure.

It generates the additional pressure required to overcome system resistance and maintain the required flow.


7. Differential Pressure Is Not Maximum System Pressure

This is one of the most important points when reading pump specifications.

Suppose a pump specification says:

Maximum system withstand pressure: 40 bar

This does not automatically mean:

The pump can continuously deliver rated flow at 40 bar differential pressure.

A pressure-withstand rating can describe the structural pressure the pump can tolerate.

Continuous differential pressure is a different performance parameter.

Always distinguish between:

Pressure Withstand

and

Continuous Differential Pressure

The actual operating point must be checked against the manufacturer's performance data.


8. Pressure Drop in the Fluid System

The pump must overcome pressure losses throughout the system.

Typical pressure losses come from:

Pipes

Longer or smaller-diameter pipes generally create greater pressure loss.

Filters

A clogged or fine filter can create significant resistance.

Valves

Partially closed valves increase pressure drop.

Heat Exchangers

Compact heat exchangers can require substantial pressure.

Fittings

Elbows, tees and restrictions also contribute to pressure loss.

Therefore, the required pump differential pressure can be estimated as the total pressure drop of the system plus any required outlet pressure.


9. Pressure and Fluid Viscosity

Pressure and viscosity should not be evaluated independently.

High-viscosity fluids generally require more torque.

Pressure also increases the hydraulic load.

The combination can therefore significantly increase motor requirements.

For example:

High Viscosity + High Differential Pressure

can result in:

  • Higher motor torque

  • Higher current

  • Higher heat generation

  • Reduced maximum RPM

  • Increased mechanical stress

For this reason, always provide both pressure and viscosity when selecting a micro gear pump.

More information:

https://www.boyangmotor.com/news/micro-gear-pump-viscosity-flow-pressure-motor-torque/


10. High-Pressure Micro Gear Pump Applications

Micro magnetic gear pumps can be useful in compact high-pressure fluid systems where controlled flow is required.

Typical applications include:

  • Battery cooling

  • New-energy thermal management

  • Chemical dosing

  • Industrial cooling

  • Analytical instruments

  • Compact hydraulic systems

  • Precision fluid circulation

For battery and new-energy coolant applications, see:

https://www.boyangmotor.com/news/high-pressure-micro-gear-pumps-for-battery-new-energy-coolant-loops-handling-up-to-40-bar-system-pressure/

The actual pressure capability depends on the specific pump model, materials, fluid, temperature and operating speed.


11. Example: Calculate Pump Operating Pressure

Consider a cooling loop with:

Parameter Value
Inlet pressure 2 bar
Required outlet pressure 12 bar
Required flow 2 L/min

The required pump differential pressure is:

ΔP = 12 − 2

ΔP = 10 bar

The pump therefore needs to generate approximately 10 bar differential pressure at the required 2 L/min flow.

The motor must then provide enough torque to operate the pump at the selected RPM and pressure.


12. What Pressure Information Should You Give a Pump Manufacturer?

When requesting a micro gear pump, avoid providing only:

"Maximum pressure: 20 bar"

Instead, provide:

  • Required flow

  • Inlet pressure

  • Outlet pressure

  • Differential pressure

  • Fluid

  • Viscosity

  • Temperature

  • Operating RPM

  • Duty cycle

For example:

2 L/min @ 10 bar differential pressure, 24 VDC, 2,000 RPM, 60°C coolant, continuous operation

This is much more useful for engineering pump selection.


13. Common Gear Pump Pressure Mistakes

Mistake 1: Confusing system pressure with differential pressure

The pump does not necessarily generate the total system pressure.

Mistake 2: Looking only at maximum pressure

A maximum pressure rating does not necessarily represent continuous operating pressure.

Mistake 3: Ignoring flow at pressure

Always evaluate:

Flow @ Differential Pressure

Mistake 4: Ignoring motor torque

Higher pressure increases the pump's mechanical load.

Mistake 5: Ignoring viscosity

High viscosity can further increase motor torque and reduce available operating speed.


Gear Pump Pressure Selection Checklist

Before selecting a pump, confirm:

Parameter Example
Required flow 2 L/min
Inlet pressure 2 bar
Outlet pressure 12 bar
Differential pressure 10 bar
Fluid Coolant
Viscosity Actual value
Temperature 60°C
RPM 2,000 RPM
Duty cycle Continuous

This information allows the pump and motor to be evaluated at the actual operating point.


Frequently Asked Questions

What is differential pressure in a gear pump?

Differential pressure is the difference between pump outlet pressure and inlet pressure.

ΔP = Pout − Pin


Is differential pressure the same as system pressure?

No.

Differential pressure is the pressure increase generated by the pump, while system pressure refers to the pressure within the overall fluid system.


Does higher pressure reduce gear pump flow?

It can.

Higher differential pressure can increase internal leakage and reduce volumetric efficiency, resulting in lower actual flow.


Does higher pressure require more motor torque?

Yes.

For a given pump displacement and speed, increasing differential pressure generally increases the torque required from the motor.


What does a 40 bar gear pump rating mean?

It depends on the manufacturer's definition.

A 40 bar specification may refer to system withstand pressure, maximum differential pressure or another test condition.

Always check the exact specification rather than assuming it represents continuous flow at 40 bar.


How should I specify pressure when ordering a micro gear pump?

Provide the required flow, inlet pressure, outlet pressure or differential pressure, fluid viscosity and temperature.

For example:

2 L/min @ 10 bar differential pressure

is much more useful than simply saying:

10 bar pump.


Conclusion

Pressure is one of the most important parameters when selecting a micro gear pump.

The key relationship is:

Differential Pressure = Outlet Pressure − Inlet Pressure

As differential pressure increases, the pump generally requires more torque and may experience greater internal leakage.

Therefore, pump selection should always consider:

Flow + Differential Pressure + RPM + Viscosity + Temperature + Motor Torque

For OEM applications, the most useful specification is the complete operating point, such as:

2 L/min @ 10 bar differential pressure

rather than a maximum pressure number alone.

For complete micro magnetic gear pump selection:

https://www.boyangmotor.com/news/how-to-select-micro-magnetic-gear-pump/

For detailed flow calculations:

https://www.boyangmotor.com/news/how-to-calculate-micro-gear-pump-flow-rate/

For BLDC motor matching:

https://www.boyangmotor.com/news/how-to-match-a-bldc-motor-with-a-micro-gear-pump/

For Boyang's micro magnetic gear pump products:

https://www.boyangmotor.com/brushless-gear-pump/