Free Quote
Leave Your Message
Why does Motor-CAD produce speed errors when simulating Brushless DC (BLDC) motors?
News

Why does Motor-CAD produce speed errors when simulating Brushless DC (BLDC) motors?

2026-05-23
When simulating a brushless blower motor, you may find a significant discrepancy between the simulated speed and the actual measured speed. For instance, the simulation might output 4,900 RPM while the actual speed is only around 4,000 RPM—a gap of nearly 1,000 RPM.

Analysis of Error Causes

  • Discrepancies in Material Databases: The default material libraries provided by the software (often based on international standards) may differ significantly from the magnetization properties of domestic Chinese ferrite materials used in production.

  • Lack of Empirical Data: The material performance parameters used in the simulation are often generic rather than based on the actual tested performance of the specific batch, leading to a model that does not reflect physical reality.

Solutions

1. Establish an Accurate Material Database

Do not rely blindly on the software's built-in database. You should develop a professional, localized database based on real-world materials. This involves importing and updating the database with actual measured performance data, such as specific demagnetization curves (B-H curves). This is the only way to fundamentally reduce simulation error.

2. Parameter Calibration (Temporary Fix)

If the root cause cannot be immediately identified, you can calibrate the model by adjusting manufacturing or "process" coefficients, such as the Br (remanence) coefficient.

Note: This is a temporary workaround. It should not be used as a permanent solution; the ultimate goal must always be the establishment of a precise material database to ensure the model's integrity.